Royal Exclusiv Red Dragon 3 Mini Speedy Pump, 60w

Royal Exclusiv Red Dragon 3 Mini Speedy Pump, 60w

$779.99

SKU: RE-110 Category:

Description

Red Dragon® 3 Mini Speedy Pump 60 Watt / 5,5m³

Technical data Red Dragon® 3 Mini Speedy Pump 60 Watt 5,5 m³:
60 Watt/h  4,25 mtr. pressure height
10V connection (prepared)
speed adjustable Brushless DC pump
Watt- and Percent- Display
intake side 40 mm – pressure side 25 mm
operating voltage: 230 Volt 50 Hz  (also in 110V/60Hz available)
Protection class pump: IP 68  control unit: IP 66
Weight pump: 3,2 kg
Hirschmann-connection for releasing the pump from the controller
Height of intake side: center 70 mm
Dimension pump: 110 mm wide / 200 mm length / ~ 160 mm height
Dimension control unit: 120 mm wide / 170 mm length / ~ 65 mm height

pdf_icon  Data_sheet_and_spare_parts.pdf   pdf_icon  Operating_and_maintenance_manual.pdf

  • Saltwater resistant M6 grade 2 titanium screws
  • Saltwater resistant parabolic rubber feet for acoustic decoupling
  • Extreme low noise brushless dc-delivery pump with grouted power electronics
  • High efficient technology “Made in Germany”
  • Inlet and Outlet complete with DIN connection, compact dimensions
  • High performance ceramics bearings and hollow shaft for bypass purging in the rotor housing
  • Only saltwater resistant pump with titanium rotor, titanium stator and shrivelled bearings
  • Easy usage and maintenance. Low risk of calcification due to polished titanium parts and compulsory purgeing
  • Heavy and massive craftsmanship against vibrations and oscillation
  • CE conformity, developed and built according to VDE guidelines

With 10V Interface connection (prepared) and removable Hirschmann-plug connection between pump and controller

//////////////////////////////////////////////////////////////////////////////////////////////////////////////////

Suitable slot pipes / split tubes for the protection of your pump
and
suitable decoupling/anti-vibration-sets, to make our silent pump more silent!

/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
The connection of a controller/computer is prepared in each pump!
Prepared for connection to an aquarium computer (E.g. GHL) via a 0-10V interface.
The additional controller, for the connection to the computer, costs 167,34€ (incl. all connection cables and main adaptor)

Tested so far following these computers:
GHL ProfiLux 3.1 + 4, from Neptune Systems the Apex Aqua Controller and with SciTronix littleblue.

Compatible with following brands:
ghl logoneptune systems logoscitronix

https://www.aquariumcomputer.com/
http://www.neptunesystems.com/
http://www.scitronix.com

//////////////////////////////////////////////////////////////////////////////
Functioning of the electronics:
Once a voltage > 0,5V to the 10V interface is, the interface adapter takes over controlling and the system and lock(disable) the buttons on the controller. Voltage will be < 0,5V normal controller operation and the buttons are again released. So can the interface adapter stay connected without performing a function.

If the Aquarium(tank)-computer voltage under 0,5V the 0-10V interface is shut down and the pump can be operated manually. From 0,5V, the interface will take over control of the scheme. In the area of 0,5V-0,8V the pump is switched off. 1V starts the pump at the lowest level (15W) and run. At an increase of 0,5V will increase the level, also. So 1V = 15W 1,5V = 20W 2V = 25W….. 5,0V = 50/60W.

At a higher input voltage remains the Speedycontroller to the maximum setting are available and no longer increases. The interface adapter behaves as if the corresponding would push the button.

Close Bitnami banner
Bitnami