Royal Exclusiv Red Dragon 3 Mini Speedy Pump, 60w

Royal Exclusiv Red Dragon 3 Mini Speedy Pump, 60w

$779.99

SKU: RE-110 Category:

Description

Red Dragon® 3 Mini Speedy Pump 60 Watt / 5,5m³

Technical data Red Dragon® 3 Mini Speedy Pump 60 Watt 5,5 m³:
60 Watt/h  4,25 mtr. pressure height
10V connection (prepared)
speed adjustable Brushless DC pump
Watt- and Percent- Display
intake side 40 mm – pressure side 25 mm
operating voltage: 230 Volt 50 Hz  (also in 110V/60Hz available)
Protection class pump: IP 68  control unit: IP 66
Weight pump: 3,2 kg
Hirschmann-connection for releasing the pump from the controller
Height of intake side: center 70 mm
Dimension pump: 110 mm wide / 200 mm length / ~ 160 mm height
Dimension control unit: 120 mm wide / 170 mm length / ~ 65 mm height

pdf_icon  Data_sheet_and_spare_parts.pdf   pdf_icon  Operating_and_maintenance_manual.pdf

  • Saltwater resistant M6 grade 2 titanium screws
  • Saltwater resistant parabolic rubber feet for acoustic decoupling
  • Extreme low noise brushless dc-delivery pump with grouted power electronics
  • High efficient technology “Made in Germany”
  • Inlet and Outlet complete with DIN connection, compact dimensions
  • High performance ceramics bearings and hollow shaft for bypass purging in the rotor housing
  • Only saltwater resistant pump with titanium rotor, titanium stator and shrivelled bearings
  • Easy usage and maintenance. Low risk of calcification due to polished titanium parts and compulsory purgeing
  • Heavy and massive craftsmanship against vibrations and oscillation
  • CE conformity, developed and built according to VDE guidelines

With 10V Interface connection (prepared) and removable Hirschmann-plug connection between pump and controller

//////////////////////////////////////////////////////////////////////////////////////////////////////////////////

Suitable slot pipes / split tubes for the protection of your pump
and
suitable decoupling/anti-vibration-sets, to make our silent pump more silent!

/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
The connection of a controller/computer is prepared in each pump!
Prepared for connection to an aquarium computer (E.g. GHL) via a 0-10V interface.
The additional controller, for the connection to the computer, costs 167,34€ (incl. all connection cables and main adaptor)

Tested so far following these computers:
GHL ProfiLux 3.1 + 4, from Neptune Systems the Apex Aqua Controller and with SciTronix littleblue.

Compatible with following brands:
ghl logoneptune systems logoscitronix

https://www.aquariumcomputer.com/
http://www.neptunesystems.com/
http://www.scitronix.com

//////////////////////////////////////////////////////////////////////////////
Functioning of the electronics:
Once a voltage > 0,5V to the 10V interface is, the interface adapter takes over controlling and the system and lock(disable) the buttons on the controller. Voltage will be < 0,5V normal controller operation and the buttons are again released. So can the interface adapter stay connected without performing a function.

If the Aquarium(tank)-computer voltage under 0,5V the 0-10V interface is shut down and the pump can be operated manually. From 0,5V, the interface will take over control of the scheme. In the area of 0,5V-0,8V the pump is switched off. 1V starts the pump at the lowest level (15W) and run. At an increase of 0,5V will increase the level, also. So 1V = 15W 1,5V = 20W 2V = 25W….. 5,0V = 50/60W.

At a higher input voltage remains the Speedycontroller to the maximum setting are available and no longer increases. The interface adapter behaves as if the corresponding would push the button.