Royal Exclusiv Red Dragon 3 to Apex Connection Cable

Royal Exclusiv Red Dragon 3 to Apex Connection Cable


SKU: RE-118 Category:


Connection Cable for Red Dragon® 3 Speedy 150W and 230W pump with 10V connetion
to the Controller/Computer

Technical data connection cable for Red Dragon® 3 Speedy pump :
for the connection of your Red Dragon® 3 (150W & 230W) pump with 10V connection to your aquarien-computer/contoller

contents of delivery:

  • 1x Connection-cable for Computer/Controller (approx. 2,0m)
    Please choose your model – APEX/ReefAi or GHL

pdf_icon  Operating_and_maintenance_manual.pdf


Use the RD3 pump as a circulation pump!

Watch, how it works! Link to the video.

This cable allows a connection to an aquarium computer (E.g. GHL) via a 0-10V interface.

Please choose your right connection-cable!

Tested so far folowing these two computers:
GHL ProfiLux 3.1 and from Neptune Systems the Apex Aqua Controller.

Compatible with following brands:
ghl logoneptune systems logoreef ai logo


Functioning of the electronics:
Once a voltage > 0,5V to the 10V interface is, the interface adapter takes over controlling and the system and lock(disable) the buttons on the controller. Voltage will be < 0,5V normal controller operation and the buttons are again released. So can the interface adapter stay connected without performing a function.

If the Aquarium(tank)-computer voltage under 0,5V the 0-10V interface is shut down and the pump can be operated manually. From 0,5V, the interface will take over control of the scheme. In the area of 0,5V-0,8V the pump is switched off. From ~ 0,8V starts the pump at the lowest level (20W) and run. At an increase of 0,5V will increase the level, also. So 1V = 20W ….. 9V = 230W.

At a higher input voltage remains the Speedycontroller to the maximum setting are available and no longer increases. The interface adapter behaves as if the corresponding would push the button.

Close Bitnami banner